Increasing the Payload and Overburden Capacity of the HD785-7 by Adding a Siring Vessel at PT Antareja Mahada Makmur's Mifa Bersaudara Site: May–December 2025
DOI:
https://doi.org/10.55324/ijoms.v5i9.1300Keywords:
hd785-7, siring vessel, payload, density, overburdenAbstract
Open-pit mining operations require high hauling productivity to achieve production targets efficiently. However, haul trucks operating under low-density overburden conditions frequently experience suboptimal payload utilisation because the vessel reaches its volumetric capacity before attaining its maximum weight capacity. This condition reduces hauling efficiency, increases operating costs, and constrains overall production performance. Accordingly, this study aimed to evaluate the effectiveness of adding a siring vessel to the HD785-7 haul truck in increasing payload capacity and improving overburden transportation performance at PT Antareja Mahada Makmur, Mifa Bersaudara Site. This research employed a descriptive quantitative approach using a field study and a before-and-after comparative analysis. Operational data including payload, vessel volume, material density, hauling productivity, and production records were collected from May to December 2025 through field observations, direct measurements, company operational databases, and supporting documentation. Root cause analysis was conducted using the Quality Control Circle (QCC) method to identify the primary contributing factors to low payload performance. The results demonstrated that the average payload increased from 86.59 tonnes prior to modification to 97.77 tonnes following modification, representing an improvement of 12.9%. The increased vessel volume enabled the transport of greater quantities of low-density overburden material without compromising equipment stability or structural integrity. In conclusion, the addition of a siring vessel constitutes an effective, practical, and economically beneficial engineering solution for optimising HD785-7 hauling performance under low-density overburden conditions, and may be considered a best practice model for adoption in comparable open-pit mining operations.
References
Alfieta, M. Z. Z. (2025). Discrete-event simulation of truck–excavator systems in surface mining using a finite-source closed-loop queuing model. Jurnal Sistem dan Manajemen Industri, 9(1), 1–14. https://doi.org/10.30656/jsmi.v9i1.11003
Baek, J., & Choi, Y. (2020). Deep neural network for predicting ore production by truck-haulage systems in open-pit mines. Applied Sciences, 10(5), 1657. https://doi.org/10.3390/app10051657
Basharaf, M., Sayadi, A. R., & Rahimdel, M. J. (2026). Improving productivity in mine loading and hauling operations through OEE analysis. Resources Policy, 115, 105873.
Degirmenci, T., & Aydin, M. (2024). Testing the load capacity curve hypothesis with green innovation, green tax, green energy, and technological diffusion: A novel approach to Kyoto protocol. Sustainable Development, 32(5), 4931–4945.
Dewald, A. J. (2024). An integrated vehicle, payload, and trajectory optimization framework for highly-coupled aircraft systems (Doctoral dissertation, Massachusetts Institute of Technology).
Fanani, A., Alwi, A., & Basuki, B. (2024). Productivity analysis of digging, loading, and hauling equipment in overburden removal activities at PT. Anugrah Borneo Sinergy in Keramat Mina field, South Kalimantan, Indonesia. Journal of Earth and Marine Technology, 5(1), 66–79. https://doi.org/10.31284/j.jemt.2024.v5i1.6426
Febrianto, A., Syafrizal, S., & Wattimena, A. K. (2023). Analisis produktivitas alat angkut dump truck pada pengupasan overburden di tambang batubara. Jurnal Pertambangan, 7(3), 133–140. https://doi.org/10.23960/jp.v7i3.598
Hryhoriev, Y., Lutsenko, S., Kuttybayev, A., Ermekkali, A., & Shamrai, V. (2023). Study of the impact of the open pit productivity on the economic indicators of mining development. IOP Conference Series: Earth and Environmental Science, 1254(1), 012050.
Kamran, M., Bhatti, M. U., Shahrukh, M., Maqsood, Z., Shahzad, A., & Rafique, M. (2022). Dynamic of performance of open-pit dump trucks in ore mining in severe climatic environment. Transportation Research Procedia, 63, 2154–2162. https://doi.org/10.1016/j.trpro.2022.06.234
Karikari, Y. S. (2026). A validated simulation framework for fuel and operational performance analysis in truck-shovel mining systems.
Manurung, H., Joko, T., & Santosa, B. (2024). Patria mud body modification study on Komatsu HD785-7 unit for overburden transportation. Indonesian Journal of Social Technology, 5(12), 5701–5710. https://doi.org/10.59141/jist.v5i12.1254
Mnzool, M., Bodziony, P., & Patyk, M. (2024). Optimization of cycle time for loading and hauling trucks in open-pit mining. Mining of Mineral Deposits, 18(1), 18–26. https://doi.org/10.33271/mining18.01.018
Mutinda, E. K., Alunda, B. O., Nzioka, A. M., & Kim, Y. J. (2022). Resolving truck payload variance and overloading in surface mines using a payload management system. Mining, 2(4), 740–762. https://doi.org/10.3390/mining2040041
Pathan, A., Raza, M. A., & Lottermoser, B. G. (2025). Simulation optimization of shovel-truck system in open-pit mines considering rockmass parameters. Journal of Advanced Transportation, 2025, 7939037. https://doi.org/10.1155/2025/7939037
Pramudya, R., Kadir, A., & Setiadi, A. (2021). Analisis efisiensi bahan bakar dump truck dalam kegiatan pengangkutan overburden dan batubara. Jurnal Sistem dan Manajemen Industri, 5(1), 25–34. https://doi.org/10.30656/jsmi.v5i1.2995
Prasetyo, Y. T., Paradise, M., & Mukarrom, F. (2024). Productivity assessment of digging and loading equipment (Cat 330D2L) and hauling equipment (Fuso 220PS) in coal mining at PT. Bhumi Sriwijaya Perdana Coal, Musi Banyuasin Regency, South Sumatra. Journal of Earth and Marine Technology, 5(1), 80–93. https://doi.org/10.31284/j.jemt.2024.v5i1.6438
Sarmidi, S., Mases, Y., & Nuryanneti, I. (2023). Kajian produktivitas alat gali-muat dan alat angkut pada pengupasan overburden di Pit TSBC, Tambang Air Laya, PT. Bukit Asam, Tbk. Jurnal Teknologi Sumberdaya Mineral (JENERAL), 4(1), 1–12.
Siddiqui, M. A. H., Chattopadhyaya, S., Sharma, S., Bains, P. S., Dwivedi, S. P., Sharma, K., Bisht, Y. S., & Abbas, M. (2025). Reliability, maintainability, and availability analysis of highwall mining machines in open pit mines: A comprehensive study for enhanced productivity and continuous output. Mining, Metallurgy & Exploration, 42(5), 3055–3072.
Tokac, B., Zhang, Q., & Sari, Y. A. (2025). Environmental and economic comparison of diesel and electric trucks in open-pit mining operations. Transportation Engineering, 13, 100220. https://doi.org/10.1016/j.treng.2025.100220
Wen, M., Yu, A., Park, Y., Calarese, D., Gerber, H.-P., & Yin, G. (2025). Homogeneous antibody-drug conjugates with dual payloads: Potential, methods and considerations. mAbs, 17(1), 2498162.
Winahyu, A., Sudjiman, L. A., & Sudjiman, P. E. (2025). Strategic decision analysis in disposal selection to manage production continuity at Pit KGB. Advanced Journal of Education and Social Humanities (AJESH), 4(5), 1–14. https://doi.org/10.62220/ajesh.v4i5.617
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Bobby Sandy, Muhammad Zulfikar, Muhammad Rizky Mafudz, Desiantoro, Eli Setiawan

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA). that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.




