Clinker Volume on Seam H’s Distribution and Estimation Based on Coal Mine’s Drill Data

Authors

  • Yoki Dwi Asmoro Geological Engineering, Hasanuddin University, Makassar, South Sulawesi, Indonesia
  • Musri Ma'waleda Geological Engineering, Hasanuddin University, Makassar, South Sulawesi, Indonesia
  • Sri Widodo Mining Engineering, Hasanuddin University, Makassar, South Sulawesi, Indonesia

DOI:

https://doi.org/10.55324/ijoms.v2i2.280

Keywords:

Clinker, coal, estimated volume

Abstract

Clinker is a rock change due to the process of burning and heating coal below the surface. The emergence of well-identified clinkers can prevent loss of coal reserve volume (Loss Reserve) and clinker can be used for haul road surfacing. The purpose of this study is to analyze the distribution pattern of clinker and estimate the volume of clinker through 3D clinker modeling in the H seam of Sambarata Area, Berau Regency, East Kalimantan Province. Research methodology is divided into literature studies, data collection, data processing, data analysis and conclusions. The data used in this study are drill data which include coordinates, elevation, type of lithology, thickness and depth of clinker, and depth of drill points. Data processing and analysis of this study was carried out through clinker correlation using Minescape software version 8.1. Clinker correlation is performed to determine the continuity of the clinker layer from one drill point to another. Based on the results of the analysis on the correlation cross section, it was concluded that the distribution of clinker follows the morphological shape of hills starting from the ground surface at an elevation of +80 to +87 masl to an elevation of +15 to +25 masl horizontally extending towards the North-South according to the direction of the coal seam strike.

References

Grapes, R., Zhang, K., & Peng, Z. lun. (2009). Paralava and clinker products of coal combustion, Yellow River, Shanxi Province, China. Lithos, 113(3–4). https://doi.org/10.1016/j.lithos.2009.07.009

Huseien, G. F., Shah, K. W., & Sam, A. R. M. (2019). Sustainability of nanomaterials based self-healing concrete: An all-inclusive insight. In Journal of Building Engineering (Vol. 23). https://doi.org/10.1016/j.jobe.2019.01.032

Johnson, S., Faiz, A., & Visser, A. (2019). Concrete Pavements for Climate Resilient Low-Volume Roads in Pacific Island Countries. In Concrete Pavements for Climate Resilient Low-Volume Roads in Pacific Island Countries. The World Bank. https://doi.org/10.1596/32394

Krishnamoorthy, V., & Pisupati, S. v. (2015). A critical review of mineral matter related issues during gasification of coal in fixed, fluidized, and entrained flow gasifiers. In Energies (Vol. 8, Issue 9). https://doi.org/10.3390/en80910430

Quintero, J. A., Candela, S. A., Ríos, C. A., Montes, C., & Uribe, C. (2009). Spontaneous combustion of the Upper Paleocene Cerrejón Formation coal and generation of clinker in La Guajira Peninsula (Caribbean Region of Colombia). International Journal of Coal Geology, 80(3–4). https://doi.org/10.1016/j.coal.2009.09.004

Saade, M. R. M., Silva, M. G. da, & Gomes, V. (2015). Appropriateness of environmental impact distribution methods to model blast furnace slag recycling in cement making. Resources, Conservation and Recycling, 99. https://doi.org/10.1016/j.resconrec.2015.03.011

Situmorang, R. L., & Burhan, B. (1995). Peta geologi Lembar Tanjung Redeb. Pusat Penelitian dan Pengembangan Geologi.

Stracher, G. B. (2018). Coal and peat fires: A global perspective. In Coal and Peat Fires: A Global Perspective (Vol. 5). Elsevier. https://doi.org/10.1016/C2016-0-02048-X

Wang, K., Jiang, S., Ma, X., Wu, Z., Zhang, W., & Shao, H. (2015). Study of the destruction of ventilation systems in coal mines due to gas explosions. Powder Technology, 286. https://doi.org/10.1016/j.powtec.2015.08.020

Zhang, Y., Zhang, X., Hower, J. C., & Hu, S. (2020). Mineralogical and geochemical characteristics of pyrometamorphic rocks induced by coal fires in Junggar Basin, Xinjiang, China. Journal of Geochemical Exploration, 213. https://doi.org/10.1016/j.gexplo.2020.106511

Downloads

Published

2022-11-17

Issue

Vol. 2 No. 2 (2022): Indonesian Journal of Multidisciplinary Science

Section

Articles

License

Copyright (c) 2022 Yoki Dwi Asmoro, Musri Ma'waleda, Sri Widodo

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA). that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.