The Link Road Design of Jalan Plupuh Tanon And Jalan Gabugan Section 1, Sragen Indonesia
DOI:
https://doi.org/10.55324/ijoms.v1i1.384Keywords:
alignment, design, link roadAbstract
Easy community life, both in terms of economic, social, educational, and others, is the purpose of designing and constructing access roads or connecting roads. In addition, road design must consider safety aspects to achieve safe, balanced, and sustainable road performance. In this study, a manual horizontal alignment road design was carried out to link the road of Jalan Plupuh Tanon and Jalan Gabugan Sragen Section 1 from STA 0 + 000 to STA 2 + 257,221 with the planning of three bend points guided by Highway Design Standard of Indonesia 2021. Primary data in the form of coordinates and contours are taken from Google Earth and the Global Mapper. The design starts by managing primary data and calculating the elements that make up the horizontal alignment so that a road with a design speed of 30 km/h is obtained, the value of e = 8%, and a radius of 200 m. Three horizontal alignment points use a Spiral-Circle-Spiral (SCS) arch with an intermediate curve (Ls) value of 38 m and a circular arch (Lc) of 44.229 m, respectively.
References
Adey, B. T., Burkhalter, M., & & Martani, C. (2019). Defining road service to facilitate road infrastructure asset management. Infrastructure Asset Management, 240-255.
Adiputra, D. S., Rifai, A. I., & Bhakti, S. K. (2022). Design of Road Geometric with AutoCAD 2D®: A Case Wirosari-Ungaran Semarang, Indonesian. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 729-738.
Arifin, A., & Rifai, A. I. (2022). Geometric Design of Upper Cisokan Hydroelectric Power Plant Access Road with AutoCAD Civil 3D® (STA 3+ 000-STA. 4+ 800). Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 851-858.
Carter, N., Killion, A., Easter, T., Brandt, J., & & Ford, A. (2020). Road development in Asia: Assessing the range-wide risks to tigers. Science Advances, 6(18).
Philanthropist, W. B., Rifai, A. I., Ramadan, A. H., & Isradi, M. (2021). Analysis of Pedestrian Facility Services on Shopping Mall Areain Satellite City During Pandemic COVID-19. ADRI International Journal of Sciences, Engineering and Technology, 6(2), 99-107
Garber, N. J., & Hoel, L. A. (2018). Traffic and Highway Engineering, Enhanced Edition - Page 790. Cengage Learning.
García, A., Camacho-Torregrosa, F. J., & Baez, P. V. (2020). Examining the effect of road horizontal alignment on the speed of semi-automated vehicles. Accident Analysis & Prevention, 146.
Gunawan, R. Y., Rifai, A. I., & Irianto, M. A. (2022). AutoCAD 2D® for Geometric Design of Big Flygi–Pematang Bake Highway (Sta. 28+ 650–Sta. 53+ 650). Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 757-765.
Hasan, A. N., Firdaus, M. R., Sundara, A., & Astor, Y. (2020). Geometric Design of Access Road Towards the Bailey Mountain Bentang Bridge. In International Seminar of Science and Applied Technology (ISSAT 2020) ( pp. pp. 283-289). Atlantis press.
He, Y., & Pei, Y. (2017). Horizontal Alignment Design Theory of Superhighways. Acta Tech, 565-574.
Howe, J. (2019). Criteria for road planning. Rural Roads and Poverty Alleviation. 18-47.
Isradi, M., & Pratama, E. A. (2020). Performance analysis of Unsignal Intersection and Road section with MKJI Method 1997. IJTI International Journal of Transportation and Infrastructure, 1-11.
Jima, D., & Sipos, T. (2022). The Impact of Road Geometric Formation on Traffic Crash and Its Severity Level . Sustainability, 14(14), 8475.
Leung, K. H. (2017). Indonesia's Summary Transport Assessment. ADB Papers on Indonesia, 11.
Mahanpoor, M., Monajjem, S., & Balali, V. (2021). An optimization model for synchronous road geometric and pavement enhancements. Journal of Traffic and Transportation Engineering (English Edition), 421-438.
Malaghan, V., Pawar, D. S., & He, H. (2021). Exploring maximum and minimum operating speed positions on road geometric elements using continuous speed data. Journal of transportation engineering, Part A: Systems, 147 (8).
Mejía, G., Sánchez, O., Castañeda, K., & Pellicer, E. (2020). Delay causes in road infrastructure projects in developing countries. Revista de la Construcción, 220-234.
Mitrovi? Simi?, J., Stevi?, Ž. Z., Bogdanovi?, V., Suboti?, M., & & Mardani, A. (2020). A novel CRITIC-Fuzzy FUCOM-DEA-Fuzzy MARCOS model for safety evaluation of road sections based on geometric parameters of road. Symmetry, 2006.
Nolte, M., Kister, N., & Maurer, M. (2018). Assessment of deep convolutional neural networks for road surface classification. 2018 21st International Conference on Intelligent Transportation Systems (ITSC), 381-386.
Nurjannah, S. N., Rifai, A. I., & End, A. F. (2022). Geometric Design for Relocation of National Road Sei Duri-Mempawah Section, West Kalimantan using AutoCAD 2D®. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 692-702.
Pei, Y. L., He, Y. M., Ran, B., Kang, J., & Song, Y. T. (2020). Horizontal alignment security design theory and application of superhighways. Sustainability, 12(6), 2222.
Rifai, A. I., Hadiwardoyo, S. P., Correia, A. G., & Pereira, P. A. (2016). Genetic Algorithm Applied for Optimization of Pavement Maintenance under Overload Traffic: Case Study Indonesia National Highway. Applied Mechanics and Materials (Vol. 845), 369-378.
Rifai, A. I., Hadiwardoyo, S. P., Correia, A. G., Pereira, P., & Cortez, P. (2015). The Data Mining Applied for The Prediction of Highway Roughness Due To Overloaded Trucks. International Journal of Technology, 6(5), 751-761.
Rifai, A. I., Surgiarti, Y. A., Isradi, M., & Mufhidin, A. (2021). Analysis of Road Performance and the impact of Development in Pasar Minggu, Jakarta: Case Study of Jalan Lenteng Agung-Tanjung Barat. ADRI International Journal of Civil Engineering, 6(1).
Rifai, A. I., Wibowo, T., Isradi, M., & Mufhidin, A. (2020). On-Street Parking and Its Impact on Road Performance: Case Commercial Area in Jakarta City. World Journal of Civil Engineering, 1(01), 10-18.
Rizki, R., Rifai, A. I., & Djamal, E. Z. (2022). Geometric Redesign of Jalan Cisauk–Jaha, Banten with Manual Method (Sta. 0+ 000-Sta. 0+ 350). Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 859-864.
Rizqi, M., Rifai, A. I., & Bhakti, S. K. (2022). Design of Road Geometric with AutoCAD Civil 3D®: A Case Jalan Kertawangunan–Kadugede, Kuningan-Indonesia. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 879-887.
Ruiz, A., & Guevara, J. (2020). Sustainable decision-making in road development: Analysis of road preservation policies. Sustainability, 12(3), 872.
Sedivy, S., Mikulova, L., Danisovic, P., Sramek, J., Remek, L., & & Kozel, M. (2021). Long-term monitored road degradation functions as a tool to increase quality of pavement design. Applied Sciences, 9839.
Shevriyanto, B., Rifai, A. I., & Chiang, Z. (2021). Street Furniture in Batam: Inspirations from Natural and Cultural Inheritance. ????, (144), 47-51.
Stephen, S., Rifai, A. I., & Nasrun, N. (2022). Implementation Autocad® Civil 3D for Horizontal Alignment Design of Indramayu-Jatibarang Highways. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 739-747.
Wenz, L., Weddige, U., M., J., & Steckel, J. C. (2020). Road to glory or highway to hell? Global road access and climate change mitigation. Environmental Research Letters, 15(7).
Xu, J., Lin, W., & Shao, Y. (2017). New design method for horizontal alignment of complex mountain highways based on "trajectory–speed" collaborative decision. Advances in Mechanical Engineering, 9(4).
You, K., Yu, Q., Huang, W., & Hu, Y. (2022). Safety-Based Optimization Model for Highway Horizontal Alignment Design. Mathematical Problems in Engineering.
Zulfa, N., Rifai, A. I., & Taufik, M. (2022). Road Geometric Design used AutoCAD Civil 3D®: A Case Study Jalan Campaka-Wanaraja Garut, Indonesia. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 843-850.
Downloads
Published
Issue
Section
License
Copyright (c) 2022 Elizabeth Olivia Joice, Andri Irfan Rifai, Mohamad Taufik
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA). that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
