The Geometric Design of Horizontal Alignment: A Case Of Post-Harvest Infrastructure Corn Drying Center, Tuban, East Java
DOI:
https://doi.org/10.55324/ijoms.v1i1.385Keywords:
geometric design, horizontal alignment, autoCAD civil 2D®, special roadAbstract
One of the aspects put forward in modern times is road infrastructure to meet the needs of moving goods, services, and people. As well as road planning for toll roads, connecting roads between regions, and roads in specific areas such as industrial areas, it also requires careful planning to meet the needs of transportation movement in them. This analysis focuses on the geometric road planning for horizontal paragraphs in the Corn Drying Center Post-Harvest Infrastructure industrial area in Tuban, East Java. The planning considers daily vehicle flows, heaviest axis loads, and bend radiuses that adjust for a limited land area. Correspondence to data in the field is obtained from the results of surveys that have been conducted (quantitative data). The result of the calculations is depicted using AutoCAD Civil 2D®.
References
Abdollahzadeh Nasiri, A., Rahmani, O., Abdi Kordani, A., Karballaeezadeh, N., & Mosavi, A. (2020). Evaluation of Safety in Horizontal Curves of Roads Using a Multi-Body Dynamic Simulation Process. International Journal of Environmental Research and Public Health, 6, 18.
Adiputra, D. S., Rifai, A. I., & Bhakti, S. K. (2022). Design of Road Geometric with AutoCAD 2D®: A Case Wirosari-Ungaran Semarang, Indonesian. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 729-738.
Arifin, A., & Rifai, A. I. (2022). Geometric Design of Upper Cisokan Hydroelectric Power Plant Access Road with AutoCAD Civil 3D® (STA 3+ 000-STA. 4+ 800). Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 851-858.
Bao, Yujie, Wang, P., & Li, Y. (2020). Research on the Optimization Design of Intersections for Safe Operation of Large Trucks. Journal of Information Hiding and Privacy Protection 2.3, 144.
Bassan, S. (2017). Sight distance and horizontal curve aspects in the design of road tunnels vs. highways: Part II (trucks). Tunnelling and Underground Space Technology 70 (2017), 422-434.
Calvo-Poyo, F., de Oña, J., Garach Morcillo, L., & Navarro-Moreno, J. (2020). Influence of Wider Longitudinal Road Markings on Vehicle Speeds in Two-Lane Rural Highways. Sustainability, 9.
Cheng, G., Cheng, R., Pei, Y., & Xu, L. (2020). Probability of Roadside Accidents for Curved Sections on Highways. Mathematical Problems in Engineering, 15-16.
Philanthropist, W. B., Rifai, A. I., Ramadan, A. H., & Isradi, M. (2021). Analysis of Pedestrian Facility Services on Shopping Mall Areain Satellite City During Pandemic COVID-19. ADRI International Journal of Sciences, Engineering and Technology, 6(2), 99-107
Douglas, R. A. (2018). Low-volume road engineering: Design, construction, and maintenance. In C. Press.
Elfandari, Amadea, & Siregar, M. L. (2021). The Relationship Between Frequency of Accident and Roads Geometric Design Consistency in NTB Province. Journal of Physics: Conference Series. Vol. 1858. No. 1. IOP Publishing, 215.
Fanning, R., Veith, G., Whitehead, M., & Auman, P. (2021). Guide to road design part 3. In Austroads, Guide to road design part 3 (p. 3). Sydney: Austroads Ltd.
Gunawan, R. Y., Rifai, A. I., & Irianto, M. A. (2022). AutoCAD 2D® for Geometric Design of Big Flygi–Pematang Bake Highway (Sta. 28+ 650–Sta. 53+ 650). Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 757-765.
Isradi, M., Nareswari, N. D., Rifai, A. I., & Muhfidin, A. (2021). Performance Analysis of Road Section and Unsignalized Intersections in Order to Prevent Traffic Jams on Jl. H. Djole - Jl. Pasar Lama. International Journal of Civil Engineering, 57.
Ministry of PUPR, Directorate General of Highways. (2021). Circular Number: 20/SE/Db/2021 on Road Geometric Design Guidelines. In K. P. Marga, Road Geometric Design Guidelines (pp. 38, 87). Jakarta: Ministry of PUPR, Director General of Highways.
Mahanpoor, Mohammad, Monajjem, S., & Balali, V. (2021). An optimization model for synchronous road geometric and pavement enhancements. Journal of Traffic and Transportation Engineering (English Edition) 8.3 , 421-438.
Manda, Manoj, Pawade, P., & Sandel, P. (2019). Geometric design of highway using Civil 3D. International Journal of Advance Research, Ideas and Innovations in Technology 5.3, 214-215.
Nurjannah, S. N., Rifai, A. I., & End, A. F. (2022). Geometric Design for Relocation of National Road Sei Duri-Mempawah Section, West Kalimantan using AutoCAD 2D®. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 692-702.
O'Callaghan, N., McHugh, B., & Marshall, K. (2021). Guide to Road Design Part 1: Objectives of Road Design. In Austroads, Guide to Road Design Part 1: Objectives of Road Design (p. 22). Sydney: Austroads Ltd.
O'Flaherty, A., C., & ed. (2018). Transport planning and traffic engineering. In O'Flaherty, C. A., & ed.. Netherlands: CRC Press.
Papadimitriou, Eleonora, & al, e. (2019). Review and ranking of crash risk factors related to the road infrastructure. Accident Analysis & Prevention 125, 85.
Pembuain, Ardilson, Priyanto, S., & Suparma, L. (2019). The Effect of Road Infrastructure on Traffic Accidents. 11th Asia Pacific Transportation and the Environment Conference (p. 147). Atlantis Press.
Pratico, F. G. (2018). Speed limits and pavement friction: A theoretical and experimental study. The Open Transportation Journal 12.1, 139.
Rahimi, Ehsan, & al, e. (2020). Investigating the injury severity of single-vehicle truck crashes in a developing country. Accident Analysis & Prevention 137, 7.
Rifai, A. I., Talib, H., Prayogo, D., & Isradi, M. (2022). Customer Satisfaction and Road Performance in Long Segment Maintenance Contract: Application of an Urban Road Network. United International Journal for Research & Technology, 10.
Rifai, Hadiwardoyo, S. P., Correia, A. G., & Pereira, P. (2016). Genetic Algorithm Applied for Optimization of Pavement Maintenance under Overload Traffic: Case Study Indonesia National Highway. Applied Mechanics and Materials. Vol. 845. Trans Tech Publications Ltd, 369-378.
Rifai, Hadiwardoyo, S. P., Correia, A. G., Pereira, P., & Cortez. (2015). The Data Mining Applied for The Prediction of Highway Roughness due to Overloaded Trucks. International Journal of Technology 6(5), 751-761.
Rizki, R., Rifai, A. I., & Djamal, E. Z. (2022). Geometric Redesign of Jalan Cisauk–Jaha, Banten with Manual Method (Sta. 0+ 000-Sta. 0+ 350). Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 859-864.
Rizqi, M., Rifai, A. I., & Bhakti, S. K. (2022). Design of Road Geometric with AutoCAD Civil 3D®: A Case Jalan Kertawangunan–Kadugede, Kuningan-Indonesia. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 879-887.
Rozi, M. e. (2022). Implementation of Value Engineering to Optimize the Designing of the Southern Java Road Project. International Journal of Scientific Engineering and Science , 152.
Shevriyanto, B., Rifai, A. I., & Chiang, Z. (2021). Street Furniture in Batam: Inspirations from Natural and Cultural Inheritance. ????, (144), 47-51.
Sinaga, Lerinsah, Sendow, T. K., & Waani, J. E. (2019). Geometric Evaluation of Roads Based on Highway Planning Standards. Static Civil Journal 7.7, 819.
Srnová, B. (2017). A Case of Road Design in Mountainous Terrain with an Evaluation of Heavy Vehicles Performance Stockholm. Master's thesis, KTH Royal Institute of Technology, 28, 31.
Stephen, S., Rifai, A. I., & Nasrun, N. (2022). Implementation Autocad® Civil 3D for Horizontal Alignment Design of Indramayu-Jatibarang Highways. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 739-747.
Veer, Raghu, S. P., Gupte, S., & Juremalani, a. J. (2018). A Review of Literature on Geometric Design of Highway. International Research Journal of Engineering and Technology (IRJET) Volume 5 , 138.
Yang, Guangchuan, Ahmed, M. M., & Gaweesh, S. (2019). . "Impact of variable speed limit in a connected vehicle environment on truck driver behavior under adverse weather conditions: driving simulator study." . Transportation research record 2673.7 (2019): 1, 132-142.
Yu, M., & Fan, W. D. (2019). Optimal variable speed limit control in connected autonomous vehicle environment for relieving freeway congestion. Journal of Transportation Engineering, Part A: Systems 145.4.
Zhao, Peibo, & Lee, C. (2018). Assessing rear-end collision risk of cars and heavy vehicles on freeways using a surrogate safety measure. Accident Analysis & Prevention 113 , 149-158.
Zheng, Y., Guo, H., & Wei, X. (2017). The Evaluation Analysis of Design Code About the Road Design of longitudinal gradient in the Mountain Road. Proceedings of the 7th International Conference on Education, Management, Computer and Society (EMCS) ( pp. 694-695). Shenyang: doi:10.2991/jnmp.2006.13.4.1
Zulfa, N., Rifai, A. I., & Taufik, M. (2022). Road Geometric Design used AutoCAD Civil 3D®: A Case Study Jalan Campaka-Wanaraja Garut, Indonesia. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 843-850.
Downloads
Published
Issue
Section
License
Copyright (c) 2022 Litwina Ratri Rosaria, Andri Irfan Rifai, Joewono Prasetijo
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA). that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
