The Geometric Design of Horizontal Curves Using The Autocad Civil 3D® Method: A Case Study of Trans Flores Roads

Authors

  • Safira Salsabila Faculty of Engineering, Universitas Mercubuana, Jakarta
  • Andri Irfan Rifai Faculty of Civil Engineering and Planning, Universitas Internasional Batam
  • Mohamad Taufik Directorate General of Highway, Ministry of Public Works and Housing

DOI:

https://doi.org/10.55324/ijoms.v1i1.387

Keywords:

autoCAD® civil 3D, geometric roads, highways, horizontal alignment

Abstract

In general, the geometric planning of roads is done manually using drawing tools and mathematical techniques. When done manually, geometric design is complicated, time-consuming, and prone to errors. Therefore, this study will use AutoCAD Civil 3D®. This study aims to redesign the Trans Flores road because of the frequent accidents found on curves and climbs and the current road drops on the Trans Flores road. This study will use research methods using secondary data and qualitative research methods. When designing geometric roads using AutoCAD Civil 3D®,  data from Google Maps, Google Earth, and Global Mapping is also required. This research will focus on the 3.5 km of road traffic starting from Sta 0+000 to Sta 3+500. The result of this study is that corners P1-P4 are planned with the type of Bend S-C-S. By using AutoCAD Civil 3D®, this research can be completed quickly and accurately.

Author Biographies

Safira Salsabila, Faculty of Engineering, Universitas Mercubuana, Jakarta

Please review

Mohamad Taufik, Directorate General of Highway, Ministry of Public Works and Housing

Please review

References

Adiputra, D. S., Rifai, A. I., & Bhakti, S. K. (2022). Design of Road Geometric with AutoCAD 2D®: A Case Wirosari-Ungaran Semarang, Indonesian. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 729-738.

Arifin, A., & Rifai, A. I. (2022). Geometric Design of Upper Cisokan Hydroelectric Power Plant Access Road with AutoCAD Civil 3D® (STA 3+ 000-STA. 4+ 800). Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 851-858.

Castañeda, K., Sánchez, O., Herrera, R. F., & Mejía, G. (2022). Highway Planning Trends. A Bibliometric Analysis. Sustainability, 1-2.

Chakole, H., & Wadhai, P. J. (2022). The comparison of geometric design using Civil 3D software and manual method. International Journal for Modern Trends in Science and Technology, 123 - 124.

Chaudhari, P. M., Goyani, J., Arkatkar, S., Joshi, G., & Easa, S. M. (2022). Design Consistency Evaluation of Two-Lane Rural Highways in Hilly Terrains,. Transportation research procedia, 75-82.

Farahmand, B., & Boroujerdian, A. M. (2018). Effect of road geometry on driver fatigue in monotonous environments: A simulator study. . Transportation research part F: traffic psychology and behaviour, 640-651.

Findley, D. J. (2022). Part 4 - Highway geometric design,. Highway Engineering (Second Edition), 157-240.

Gaikawad, P., & Ghodmare, S. D. (2020). A Review-Geometric Design of Highway with the Help of AutoCAD Civil 3D® . International Journal for Research in Applied Science and Engineering Technology, 916 - 917.

Geedipally, S. R., Pratt, M. P., & Lord, D. (2019). Effects of geometry and pavement friction on horizontal curve crash frequency. Journal of Transportation Safety & Security, 167-188.

Gunawan, R. Y., Rifai, A. I., & Irianto, M. A. (2022). AutoCAD 2D® for Geometric Design of Big Flygi–Pematang Bake Highway (Sta. 28+ 650–Sta. 53+ 650). Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 757-765.

Koloushani, M., Ozguven, E., E., F. A., & Tabibi, M. (2020). Mobile mapping system-based methodology to perform automated road safety audits to improve horizontal curve safety on rural roadways. Computational Research Progress in Applied Science & Eng, 263-265.

KS, A. K. (2017). Study of Geometric Design, hydraulic and hydrology for Highways Using Civil 3D Software-A Case Study. International Research Group - IJET JOURNAL, 291-292.

Li, C., Ding, L., & Zhong, B. (2019). Highway planning and design in the Qinghai–Tibet Plateau of China. a cost–safety balance perspective. Engineering, 337-349.

Ma, Q., Yang, H., Wang, Z., Xie, K., & Yang, D. (2020). Modeling crash risk of horizontal curves using large-scale auto-extracted roadway geometry data. Accident Analysis & Prevention, 1-2.

Ma, Z., & Liu, S. (2018). A review of 3D reconstruction techniques in civil engineering and their applications. Advanced Engineering Informatics, 163-174.

Mandal, M., Pawade, P., Sandel, P., & Infrastructure, R. S. (2019). Geometric design of highway using Civil 3D. International Journal of Advance Research, Ideas and Innovations in Technology, 214.

Nurjannah, S. N., Rifai, A. I., & End, A. F. (2022). Geometric Design for Relocation of National Road Sei Duri-Mempawah Section, West Kalimantan using AutoCAD 2D®. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 692-702.

Ouma, Y. O., Yabann, C. E., Kirichu, M., & Tateishi, R. (2014). Optimization of urban highway bypass horizontal alignment: a methodological overview of intelligent spatial MCDA approach using fuzzy AHP and GIS. . Advances in Civil Engineering, 1-2.

Pandey, S., Atul, E., & Bajpai, Y. (2019). PLANNING, DESIGNING AND PROPOSING A FLYOVER ROAD USING AUTOCAD® CIVIL 3DSOFTWARE. PLANNING, 165 - 167.

Pau, D. I., & Aron, S. (2018). Analisis Desain Geometrik Jalan Pada Lengkung Horisontal Tikungan Dengan Metode Bina Marga dan AASHTO Studi Kasus Ruas Jalan Km 180–Waerunu Sta 207+ 500 s/d Sta 207+ 700. SIARTEK, 4(2), 29-35.

Philanthropist, W. B., Rifai, A. I., Ramadan, A. H., & Isradi, M. (2021). Analysis of Pedestrian Facility Services on Shopping Mall Areain Satellite City During Pandemic COVID-19. ADRI International Journal of Sciences, Engineering and Technology, 6(2), 99-107

Raji, S. A., Zava, A., Jirgba, K., & Osunkunle, A. B. (2017). Geometric Design of a Highway Using AutoCAD Civil 3D®. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 7415-7416.

Rifai, A. I., Hadiwardoyo, S. P., Correia, A. G., Pereira, P. A., & Cortez, P. (2015). The data mining applied for the prediction of highway roughness due to overloaded trucks. International Journal of Technology, 751 - 761.

Rifai, A. I.; Hadiwardoyo, S. P.; Correia, A. G.; Pereira, P. A. U. L. O. (2016). Genetic Algorithm Applied for Optimization of Pavement Maintenance under Overload Traffic: Case Study Indonesia National Highway. In Applied Mechanics and Materials, 369 - 378.

Rizki, R., Rifai, A. I., & Djamal, E. Z. (2022). Geometric Redesign of Jalan Cisauk–Jaha, Banten with Manual Method (Sta. 0+ 000-Sta. 0+ 350). Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 859-864.

Rizqi, M., Rifai, A. I., & Bhakti, S. K. (2022). Design of Road Geometric with AutoCAD Civil 3D®: A Case Jalan Kertawangunan–Kadugede, Kuningan-Indonesia. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 879-887.

Shevriyanto, B., Rifai, A. I., & Chiang, Z. (2021). Street Furniture in Batam: Inspirations from Natural and Cultural Inheritance. ????, (144), 47-51.

Sil, G., N. S., Maji, A., & Maurya, A. K. (2020). Effect of horizontal curve geometry on vehicle speed distribution: a four-lane divided highway study. Transportation letters, 713-722.

Sinaga, L., Sendow, T. K., & Waani, J. E. (2019). Geometric Evaluation of Roads Based on Highway Planning Standards. Static Civil Journal, 819-820.

Sitompul, R. F. (2020). Evaluation of visibility on vertical alignment and horizontal alignment on the bend of the high cliff-sei rampah-cliff road. (Doctoral dissertation, UMSU). 23 - 24.

Stephen, S., Rifai, A. I., & Nasrun, N. (2022). Implementation Autocad® Civil 3D for Horizontal Alignment Design of Indramayu-Jatibarang Highways. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 739-747.

Sukalkar, V. G., & Pawar, K. (2022). A Study and Design of Two Lane with Paved Shoulder in Green Filed Corridor, By Using Civil 3D. International Journal of Scientific Research in Science, Engineering and Technology, 1-2.

Suprayoga, G. B., Witte, P., & Spit, T. (2020). Coping with strategic ambiguity in planning sustainable road development: Balancing economic and environmental interests in two highway projects in Indonesia. Impact Assessment and Project Appraisal, 38(3), 233 - 244.

Syaiful, S., & Rusfana, H. (2022). Rigid Pavement Planning In Traffic: Case Study In Ciherang Road And Pemuda Road, Bogor Regency, INDONESIA. . Journal of Applied Engineering Science, 20(2),, 485-487.

Zulfa, N., Rifai, A. I., & Taufik, M. (2022). Road Geometric Design used AutoCAD Civil 3D®: A Case Study Jalan Campaka-Wanaraja Garut, Indonesia. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 843-850.

Downloads

Published

2023-01-17

Issue

Vol. 1 No. 1 (2022): Special Issue: Indonesian Journal of Multidisciplinary Science

Section

Articles

License

Copyright (c) 2022 Safira Salsabila, Andri Irfan Rifai, Mohamad Taufik

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA). that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.