The Geometric Redesign of Horizontal Curved Using AutoCAD Civil 3D®: A Case Jalan Garuda – Jalan Moh. Hatta, Tasikmalaya West Java
DOI:
https://doi.org/10.55324/ijoms.v1i1.389Keywords:
roads, horizontal curves, autoCAD civil 3D®Abstract
Highways are needed because they are the most widely used transportation infrastructure to support the economy and daily human activities that function to pass traffic on it quickly, safely, and comfortably. In today's world of rapid digital improvement, road planning using AutoCAD Civil 3D® results in a more efficient, accurate, and time-saving road planning process than road planning using manual methods. The horizontal alignment of the road determines the location of the road in question. The horizontal alignment has three geometric components: tangent, curve, and transition between straight line and arch. The purpose of writing this paper is to plan the geometric road on the North Ring Road section Jalan Garuda - Jalan Moh. Hatta in the northern area of Tasikmalaya, West Java. The road is planned to add land transportation facilities and connect the Cibeureum District - Cipedes District. The length of the road section is 1016 m or 1,016 km (STA 0+000 – STA 1+016.79).
References
A.K., K. (2017). Study of Geometric Design, hydraulic and hydrology for Highways Using Civil 3D Software-A Case Study. Study of Geometric Design.
Adiputra, D. S., Rifai, A. I., & Bhakti, S. K. (2022). Design of Road Geometric with AutoCAD 2D®: A Case Wirosari-Ungaran Semarang, Indonesian. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 729-738.
Aguiar, M. O., da Silva, G. F., Mauri, G. R., de Mendonça, A. R., de Oliveira Santana, C. J., M. G., & Leite, C. C. (2021). Optimizing forest road planning in a sustainable forest management area in the Brazilian Amazon. Journal of Environmental Management, 288, 112332.
Agustaniah, R., & Wicaksono, A. (2020). Analytic Hierarchy Process for Priority Policy on Road Access to Tourist Areas of Berau Regency, East Kalimantan. In 2nd International Symposium on Transportation Studies in Developing Countries (ISTSDC 2019) (pp. 13-18).
Álvarez, P., Fernández, M. A., Gordaliza, A., Mansilla, A., & Molinero, A. ((2020). Geometric road design factors affecting the risk of urban run-off crashes. A case-control study. PLoS one,15(6), e0234564.
Arifin, A., & Rifai, A. I. (2022). Geometric Design of Upper Cisokan Hydroelectric Power Plant Access Road with AutoCAD Civil 3D® (STA 3+ 000-STA. 4+ 800). Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 851-858.
Bobermin, M. P., Silva, M. M., & Ferreira, S. (2021). Driving simulators to evaluate road geometric design effects on driver behaviour: A systematic review. . Accident Analysis & Prevention, 150, 105923.
Casal, G., Santamarina, D., & Vázquez-Méndez, M. E. (2017). Optimization of horizontal alignment geometry in road design and reconstruction. Transportation Research Part C: Emerging Technologies, 74, , 261-274.
Castañeda, K., Sánchez, O., Herrera, R. F., & Mejía, G. (2022). Highway Planning Trends: A Bibliometric Analysis. Sustainability, 14(9), 5544.
Chakole, H., & Wadhai, P. J. (2022). The comparison of geometric design using Civil 3D software and manual method.
Philanthropist, W. B., Rifai, A. I., Ramadan, A. H., & Isradi, M. (2021). Analysis of Pedestrian Facility Services on Shopping Mall Areain Satellite City During Pandemic COVID-19. ADRI International Journal of Sciences, Engineering and Technology, 6(2), 99-107
Faisal, R., Ahlan, M., Mutiawati, C., & Rozi, M. (2021). The comparison between the method of Bina Marga and the pavement condition index (PCI) in road damage condition evaluation (case study: Prof. Ali Hasyimi Street, Banda Aceh). . In IOP Conference Series: Materials Science and Engineering (Vol. 1087, No. 1), 012028.
Gaikawad, P., & Ghodmare, S. D. (2020). A Review-Geometric Design of Highway with the Help of Autocad Civil 3D. International Journal for Research in Applied Science and Engineering Technology, 8(5).
Gunawan, R. Y., Rifai, A. I., & Irianto, M. A. (2022). AutoCAD 2D® for Geometric Design of Big Flygi–Pematang Bake Highway (Sta. 28+ 650–Sta. 53+ 650). Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 757-765.
Kachhawah, N. P., & Deulkar, V. (2022). A Review Article of Comprehensive Observation of Highways Construction, Planning and Scheduling Using Sampling Method.
Karlsson, C. S., Kalantari, Z., Mörtberg, U., Olofsson, B., & Lyon, S. W. (2017). Natural hazard susceptibility assessment for road planning using spatial multi-criteria analysis. Environmental management, 60(5), 823-851.
Ministry of Public Works. (2011). Regulation of the Minister of Public Works Number: 19/Prt/M/2011. In K. P. General, Road Technical Requirements And Road Technical Planning Criteria (p. 20). Jakarta: Ministry of Public Works.
Ministry of PUPR, Director General of Highways. (2021, October 19). Circular Letter Number: 20/SE/Db/2021 concerning Road Geometric Design Guidelines. In K. P. Marga, Road Geometric Design Guidelines (p. 1). Jakarta: Ministry of PUPR, Director General of Highways.
Ministry of Public Works and Public Housing, I. (2021). Road Geometric Design Guidelines. Circular No:20/SE/DB/2021,87.
Kriswardhana, W., Hasanuddin, A., & Palestine, I. M. (2020). Modelling road traffic accident rate and road geometric parameters relationship. In AIP Conference Proceedings (Vol. 2278, No. 1), 020003.
Kumar, R., & Vyas, T. (2021). Comparative Study and Parametric Analysis of IRC and AASHTO Standards for Urban Road Design. Intelligent Transport Management: Issues and Challenges, 124.
Laschi, A., Foderi, C., Fabiano, F., Neri, F., Cambi, M., Mariotti, B., & Marchi, E. (2019). Forest road planning, construction and maintenance to improve forest fire fighting: a review. Croatian Journal of Forest Engineering: Journal for Theory and Application of Forestry Engineering 40.1, 207-219.
Li, C., Ding, L., & Zhong, B. (2019). Highway planning and design in the Qinghai–Tibet Plateau of China: a cost–safety balance perspective. Engineering, 5(2), 337-349.
Mandal, M., Pawade, P., Sandel, P., & Infrastructure, R. S. (2019). Geometric design of highway using Civil 3D. International Journal of Advance Research, Ideas and Innovations in Technology, 5(3).
Mandal, M., Pawade, P., Sandel, P., & Infrastructure, R. S. (2019). Geometric design of highway using Civil 3D. International Journal of Advance Research, Ideas and Innovations in Technology, 5(3).
Mikolaj, J., Remek, ?., & Margorinova, M. (2019). Road user effects related to pavement degradation based on the highway development and management tools. Transportation Research Procedia, 40, 1141-1149.
Nurjannah, S. N., Rifai, A. I., & End, A. F. (2022). Geometric Design for Relocation of National Road Sei Duri-Mempawah Section, West Kalimantan using AutoCAD 2D®. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 692-702.
Paikun, P., SP, R. A., Destaman, F., & Winardi, D. (2021). Road Geometric Feasibility In Road Sagaranten–Tegalbuleud Km. BDG 175+ 100. ASTONJADRO: CEAESJ, 10(1), 117-134.
Pandey, S., Atul, E., & Bajpai, Y. (2019). PLANNING, DESIGNING AND PROPOSING A FLYOVER ROAD USING AUTOCAD CIVIL 3D SOFTWARE. PLANNING, 5(08).
Plessen, M. G., Bernardini, D., Esen, H., & Bemporad, A. (2017). Spatial-based predictive control and geometric corridor planning for adaptive cruise control coupled with obstacle avoidance. . IEEE Transactions on Control Systems Technology, 26(1), , 38-50.
Qiao, E. M., & Shang, D. W. (2019). Simulation Study on Pedestrian Road Planning in Ancient Building Groups Under Cloud Computing Environment. International Conference on Advanced Hybrid Information Processing. , 355-363.
Raji, S. A., Zava, A., Jirgba, K., & Osunkunle, A. B. (2017). Geometric Design of a Highway Using Autocad Civil 3d. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 4(6).
Raji, S. A., Zava, A., Jirgba, K., & Osunkunle, A. B. (2017). Geometric Design of a Highway Using Autocad Civil 3d. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 4(6).
Rifai, A. I., H. S., Correia, A. G., & Pereira, P. A. (2016). Genetic Algorithm Applied for Optimization of Pavement Maintenance under Overload Traffic: Case Study Indonesia National Highway. . Applied Mechanics and Materials (Vol. 845) , 36.
Rifai, A. I., Hadiwardoyo, S. P., Correia, A. G., & Pereira, P. A. (2016). Genetic Algorithm Applied for Optimization of Pavement Maintenance under Overload Traffic: Case Study Indonesia National Highway. Applied Mechanics and Materials (Vol. 845) (pp. 36).
Rifai, A. I., Hadiwardoyo, S. P., Correia, A. G., Pereira, P., & Cortez, P. (2015). The data mining applied for the prediction of highway roughness due to overloaded trucks. . International Journal of Technology, , 6(5), 751-761.
Rifai, A. I., Hadiwardoyo, S. P., Correia, A. G., Pereira, P., & Cortez, P. (2015). The data mining applied for the prediction of highway roughness due to overloaded trucks. International Journal of Technology, 6(5), 751-761.
Rizki, R., Rifai, A. I., & Djamal, E. Z. (2022). Geometric Redesign of Jalan Cisauk–Jaha, Banten with Manual Method (Sta. 0+ 000-Sta. 0+ 350). Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 859-864.
Rizqi, M., Rifai, A. I., & Bhakti, S. K. (2022). Design of Road Geometric with AutoCAD Civil 3D®: A Case Jalan Kertawangunan–Kadugede, Kuningan-Indonesia. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 879-887.
Rusli, R. H. (2017). Single-vehicle crashes along rural mountainous highways in Malaysia: An application of random parameters negative binomial model. . Accident Analysis & Prevention, 102, , 153-164.
Shevriyanto, B., Rifai, A. I., & Chiang, Z. (2021). Street Furniture in Batam: Inspirations from Natural and Cultural Inheritance. ????, (144), 47-51.
Sloan, S., Alamgir, M., Campbell, M. J., Setyawati, T., & Laurance, W. F. (2019). Development corridors and remnant-forest conservation in Sumatra, Indonesia. Tropical Conservation Science, 12.
Soehodho, S. (2017). Public transportation development and traffic accident prevention in Indonesia. IATSS research, 40(2), 76-80.
Stephen, S., Rifai, A. I., & Nasrun, N. (2022). Implementation Autocad® Civil 3D for Horizontal Alignment Design of Indramayu-Jatibarang Highways. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 739-747.
Strano, E., Giometto, A., Shai, S., Bertuzzo, E., Mucha, P. J., & Rinaldo, A. (2017). The scaling structure of the global road network. Royal Society open science, 4(10).
Sukalkar, V. G., & Pawar, K. (2022). A Study and Design of Two Lane with Paved Shoulder in Green Filed Corridor, By Using Civil 3D.
Sun, H., Qiao, F., Wang, Z., & Guo, L. (2019). A two-level identification model for selecting the coordination strategy for the urban arterial road based on fuzzy logic. International Journal of Simulation and Process Modelling, 14(6), 478-487.
Syaiful, S., & Rusfana, H. (2022). Rigid Pavement Planning In Traffic: Case Study In Ciherang Road And Pemuda Road, Bogor Regency, INDONESIA. Journal of Applied Engineering Science, 20(2), 485-497.
Syaiful, S., & Syahrulloh, F. (2021). Geometric planning of Toll Roads on Ringroad road development. ARPN Journal of Engineering and Applied Sciences, 16(8), 1900-1914.
Veer, S. P., Gupte, S., & Juremalani, J. (2018). A Review of Literature on Geometric Design of Highway. International Research Journal of Engineering and Technology (IRJET) Volume,5.
Vishwas, J. S., & GR, D. M. (2021). Geometric Design and Validation of Road Corridor Modelling Using Civil 3d Software.
Wedajo, T., Quezon, E. T., & Mohammed, M. (2017). Analysis of road traffic accident related of geometric design parameters in Alamata-Mehoni-Hewane section. . Int. J. Sci. Eng. Res,, 8(1), 874-881.
You, K., Yu, Q., Huang, W., & Hu, Y. (2022). Safety-Based Optimization Model for Highway Horizontal Alignment Design. Mathematical Problems in Engineering.
Zulfa, N., Rifai, A. I., & Taufik, M. (2022). Road Geometric Design used AutoCAD Civil 3D®: A Case Study Jalan Campaka-Wanaraja Garut, Indonesia. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 843-850.
Downloads
Published
Issue
Section
License
Copyright (c) 2022 Nida Ulchurriyyah, Andri Irfan Rifai, Mohamad Taufik
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA). that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
