The Geometric Design of Horizontal Curved on Jalan Drono – Nganom, Wonogiri Using Autocad® Civil 3D
DOI:
https://doi.org/10.55324/ijoms.v1i1.390Keywords:
autoCAD civil 3D®, geometric roads, horizontal alignmentAbstract
An efficient network of highway infrastructure is a decisive factor in promoting the socio-economic development of a region. Road construction is intended to connect isolated areas and promote economic growth through good population mobility considering comfort, safety, and smoothness by keeping abreast of transportation technology developments. They were planning the geometric design of the highway through the process of selecting the appropriate geometric aspects as well as design controls that govern the critical elements of the highway design. The current trend of planning for geometric road design is directed at using computer programs to make the results more precise and save time and effort. In this geometric planning, the author plans a geometric horizontal curved road on the Jalan Drono - Nganom, Ngadirojo District, Wonogiri Regency, using AutoCAD Civil 3D®. The creation of this road aims to facilitate the flow of transportation and economic equality of the area with two SCS (Spiral–Circle–Spiral) type bends, a radius of 400 m, a plan speed (Vr) of 80 km/h, a maximum slope of 0.06 and a friction coefficient of 0.14.
References
Adiputra, D. S., Rifai, A. I., & Bhakti, S. K. (2022). Design of Road Geometric with AutoCAD 2D®: A Case Wirosari-Ungaran Semarang, Indonesian. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 729-738.
Arifin, A., & Rifai, A. I. (2022). Geometric Design of Upper Cisokan Hydroelectric Power Plant Access Road with AutoCAD Civil 3D® (STA 3+ 000-STA. 4+ 800). Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 851-858.
Aryal, P. (2020). Optimization of geometric road design for autonomous vehicle. Digitala Vetenskapliga Arkivet.
Bryzhko, V. G., & Bryzhko, I. V. (2019). Comprehensive assessment of the impact of road infrastructure development in a rural municipal area (Russia). Revista Espacios, 40(37).
Castañeda, K., Sánchez, O., Herrera, R. F., & & Mejía, G. (2022). Highway Planning Trends: A Bibliometric Analysis. Sustainability.
Chakole, H., & J.Wadhai, D. (2022). A Review on The comparison of geometric design using Civil 3D software and manual method. International Journal for Modern Trends in Science and Technology.
Cui, T. (2022). Construction Journal. Research on design technology of safety facilities in highway traffic engineering, 1.
Philanthropist, W. B., Rifai, A. I., Ramadan, A. H., & Isradi, M. (2021). Analysis of Pedestrian Facility Services on Shopping Mall Areain Satellite City During Pandemic COVID-19. ADRI International Journal of Sciences, Engineering and Technology, 6(2), 99-107
Eliseev, M., Tomchinskaya, T., Lipenkov, A., & Blinov, A. (2017). Using 3D-modeling technologies to increase road safety. . Transportation Research Procedia, 20, 171-179.
Findley, D. J. (2017). Highway Geometric Design. Construction Journal.
Gaikawad, P., & Ghodmare, S. D. (2020). A Review-Geometric Design of Highway with the Help of Autocad Civil 3D. International Journal for Research in Applied Science and Engineering Technology.
Gunawan, R. Y., Rifai, A. I., & Irianto, M. A. (2022). AutoCAD 2D® for Geometric Design of Big Flygi–Pematang Bake Highway (Sta. 28+ 650–Sta. 53+ 650). Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 757-765.
Lihong, L., Tongshuai, Y., & Wei, Z. (2018). Methods of Traffic Conflict and Definition. In Proceedings of the Asia-Pacific Conference on Intelligent Medical 2018 & International Conference on Transportation and Traffic Engineering 2018, pp. 67-71.
Mandal, M., Pawade, P., Sandel, P., & Infrastructure, R. S. (2019). Geometric design of highway using Civil 3D. International Journal of Advance Research, Ideas and Innovations in Technology. International Journal of Advance Research, Ideas and Innovations in Technology, 5(3).
Mijic, N. (2019). Application of the Airborne LIDAR Technology on the Quarry Using AutoCAD Civil 3D Software. Springer Nature, 6(3).
Nurjannah, S. N., Rifai, A. I., & End, A. F. (2022). Geometric Design for Relocation of National Road Sei Duri-Mempawah Section, West Kalimantan using AutoCAD 2D®. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 692-702.
Paikun, SP, R. W., Destaman, F., & Winardi, D. (2021). Road Geometric Feasibility In Road Sagaranten–Tegalbuleud Km. BDG 175+ 100. ASTONJADRO: CEAESJ.
Pandey, S., Atul, E., & Bajpai, Y. (2019). PLANNING, DESIGNING AND PROPOSING A FLYOVER ROAD USING AUTOCAD CIVIL 3D SOFTWARE. PLANNING.
Pandey, S., Atul, E., & Bajpai, Y. (2019). PLANNING, DESIGNING AND PROPOSING A FLYOVER ROAD USING AUTOCAD CIVIL 3D SOFTWARE. Planning.
Pandey, S., Atul, E., & Bajpai, Y. (2020). Planning, Designing and Proposing a Flyover Road Using Autocad Civil 3D Software. PLANNING.
Raji, S. A., Zava, A., Jirgba, K., & Osunkunle, A. B. (2017). Geometric Design of a Highway Using Autocad Civil 3d. Journal of Multidisciplinary Engineering Science and Technology (JMEST).
Rifai, A. I., Hadiwardoyo, S. P., Correia, A. G., & Pereira, P. A. (2016). Genetic Algorithm Applied for Optimization of Pavement Maintenance under Overload Traffic: Case Study Indonesia National Highway. Applied Mechanics and Materials (Vol. 845) ( pp. 369-378). Trans Tech Publications Ltd.
Rifai, A. I., Hadiwardoyo, S. P., Correia, A. G., Pereira, P., & Cortez, P. (2015). The data mining applied for the prediction of highway roughness due to overloaded trucks. International Journal of Technology, 6(5), 751-761.
Rizki, R., Rifai, A. I., & Djamal, E. Z. (2022). Geometric Redesign of Jalan Cisauk–Jaha, Banten with Manual Method (Sta. 0+ 000-Sta. 0+ 350). Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 859-864.
Rizqi, M., Rifai, A. I., & Bhakti, S. K. (2022). Design of Road Geometric with AutoCAD Civil 3D®: A Case Jalan Kertawangunan–Kadugede, Kuningan-Indonesia. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 879-887.
Setyawan, A., Yusep, M. P., Setiawan, B., Muandululman, F. F., Setiawan, A. G., & Prabowo, G. R. (2021). The Evaluation of Deflection and Tensile Stress in Jointed Plain Concrete Pavement for a Damaged Road. In Journal of Physics: Conference Series (Vol. 1912, No. 1, p. 012057) IOP Publishing, 1-8.
Shevriyanto, B., Rifai, A. I., & Chiang, Z. (2021). Street Furniture in Batam: Inspirations from Natural and Cultural Inheritance. ????, (144), 47-51.
Stephen, S., Rifai, A. I., & Nasrun, N. (2022). Implementation Autocad® Civil 3D for Horizontal Alignment Design of Indramayu-Jatibarang Highways. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 739-747.
Sukalkar, V. G., & Pawar, K. (2022). A Study and Design of Two Lane with Paved Shoulder in Green Filed Corridor, By Using Civil 3D. International Journal of Scientific Research in Science, Engineering and Technology, 202-211.
Suprayoga, G. B., Witte, P., & Spit, T. (2020). Coping with strategic ambiguity in planning sustainable road development: balancing economic and environmental interests in two highway projects in Indonesia. Impact Assessment and Project Appraisa.
Syaiful, S., & Rusfana, H. (2022). Rigid Pavement Planning In Traffic: Case Study In Ciherang Road And Pemuda Road, Bogor Regency, INDONESIA. Journal of Applied Engineering Science, 20(2),, 485-487.
Valeryevna, M. A., & Vitalievna, C. V. (2018). Designing the territory of the cottage village in AutoCAD Civil 3D. AlfaBuild, 3(1), 33-45.
Vishwas, J. S., & GR, D. M. (2021). Geometric Design and Validation of Road Corridor Modelling Using Civil 3d Software. SSRN.
You, K., Yu, Q., Huang, W., & Hu, Y. (2022). Safety-Based Optimization Model for Highway Horizontal Alignment Design. Mathematical Problems in Engineering, 1-15.
Zhao, L., Liu, Z., & Mbachu, J. (2019). Highway alignment optimization: an integrated BIM and GIS approach. SPRS International Journal of Geo-Information, 8(4), 172
Zulfa, N., Rifai, A. I., & Taufik, M. (2022). Road Geometric Design used AutoCAD Civil 3D®: A Case Study Jalan Campaka-Wanaraja Garut, Indonesia. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 843-850.
Downloads
Published
Issue
Section
License
Copyright (c) 2022 Viranti Fahra Salsabila, Andri Irfan Rifai, Muhammad Isradi
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA). that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
