The Horizontal Curved Geometric Redesign on Jalan Kayu Api Kuala Penaso, Riau Using the Autocad Civil 3d® Method

Authors

  • Syafiq Human Maulana Faculty of Engineering, Universitas Mercubuana, Jakarta
  • Andri Irfan Rifai Faculty of Civil Engineering and Planning, Universitas Internasional Batam
  • Muhammad Isradi Faculty of Civil Engineering and Planning, Universitas Internasional Batam

DOI:

https://doi.org/10.55324/ijoms.v1i1.391

Keywords:

geometric roads, horizontal alignment, autoCAD civil 3D®

Abstract

Jalan Kayu Api Kuala Penaso, Talang Muandau district, Bengkalis Regency, is a section of road that connects Beringin Village to the district capital, with straight road conditions and has several sharp bend points. Horizontal alignment (road traffic) is a crucial point in geometry planning. It can produce road shapes that can be utilized for traffic operations quickly, smoothly, safely, comfortably, and efficiently with two different types of bends. The first bend uses the SCS type (Spiral – Circle – Spiral) with a radius of 800 m. The second bend uses the SS type (Spiral – Spiral) with a radius of 400 m. Plan speed (Vr) is 80 km/h, with a maximum slope of 0.06 and a transverse tightness (fmax) of 0.15.

Author Biographies

Syafiq Human Maulana, Faculty of Engineering, Universitas Mercubuana, Jakarta

Please review

Muhammad Isradi, Faculty of Civil Engineering and Planning, Universitas Internasional Batam

Please review

References

Adiputra, D. S., Rifai, A. I., & Bhakti, S. K. (2022). Design of Road Geometric with AutoCAD 2D®: A Case Wirosari-Ungaran Semarang, Indonesian. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 729-738.

Andika, I., Rifai, A. I., & Djamal, E. Z. (2022). The Evaluation of New Roundabout Performance: A Case Study of Barelang Roundabout Development. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 873-878.

Arifin, A., & Rifai, A. I. (2022). Geometric Design of Upper Cisokan Hydroelectric Power Plant Access Road with AutoCAD Civil 3D® (STA 3+ 000-STA. 4+ 800). Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 851-858.

Aryal, P. (2020). Optimization of geometric road design for autonomous vehicle. Digitala Vetenskapliga Arkivet.

Chakole, H., & Wadhai, P. J. (2022). A Review on The comparison of geometric design using Civil 3D software and manual method. International Journal for Modern Trends in Science and Technology, 8(06): 115-122.

Chan, T.-K., & Personal, K. S. (2022). Construction in Indonesia: Looking Back and Moving Forward. Routledge.

Philanthropist, W. B., Rifai, A. I., Ramadan, A. H., & Isradi, M. (2021). Analysis of Pedestrian Facility Services on Shopping Mall Areain Satellite City During Pandemic COVID-19. ADRI International Journal of Sciences, Engineering and Technology, 6(2), 99-107

Findley, J, D., Cunningham, M, C., Jr., B., H, T., . . . F, L. (2021). Highway Engineering: Planning, Design, And Operations. Butterworth-Heinemann.

Gunawan, R. Y., Rifai, A. I., & Irianto, M. A. (2022). AutoCAD 2D® for Geometric Design of Big Flygi–Pematang Bake Highway (Sta. 28+ 650–Sta. 53+ 650). Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 757-765.

Heydari, Hickford, McIlroy, Turner, & Bachani. (2019). State of knowledge and future directions. Sustainability. Road safety in low-income countries, 11(22).

Islam, M. H., Hua, L. T., Hamid, H., & Azarkerdar, A. (2019). Relationship of Accident Rates and Road. In IOP Conference Series: Earth and Environmental Science, Vol. 357, No. 1.

Isradi, M., Sari, Y. A., Rifai, A. I., Rosyid, A., Hamid, A., & Prasetijo, J. (2022). Mendeley Management Reference Application and Scientific Writing Strategy. THE SPIRIT OF SOCIETY JOURNAL: International Journal of Society Development and Engagement, 6(1), 1-11.

Kang, Y.-s., & Ferris, J. B. (2018). Performance Margin for Geometric Road Design. SAE International Journal of Passenger Cars - Mechanical Systems, 2.

Mandal, M., Pawade, P., & Sandel, P. (2019). Geometric design of highway using Civil 3D. International Journal of Advance Research, Ideas and Innovations in Technology, 5(3).

Mandal, M., Pawade, P., & Sandel, P. (2019). Geometric design of highway using Civil 3D. International Journal of Advance Research, Ideas and Innovations in Technology, 5(3).

Nurjannah, S. N., Rifai, A. I., & End, A. F. (2022). Geometric Design for Relocation of National Road Sei Duri-Mempawah Section, West Kalimantan using AutoCAD 2D®. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 692-702.

Pandey, S., Atul, E., & Bajpai, Y. (2019). Planning, Designing And Proposing A Flyover Road Using Autocad Civil 3d Software. International Journal of Technical Innovation in Modern, 5(08).

Raji, S. A., Zava, A., Jirgba, K., & Osunkunle, A. B. (2017). Geometric Design of a Highway Using Autocad Civil 3d. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 4(6).

Rifai, A. I. (2022). IMPLEMENTATION OF BUILDING INFORMATION MODELLING ON THE REHABILITATION AND RECONSTRUCTION OF ROADS AFTER THE LIQUEFACTION DISASTER. Proceedings of HPJI (Indonesian Road Development Association), 10-10.

Rifai, A. I., & Handayani, S. Development of a Data Mining-Based Road Maintenance Management System Interface Interface Support. Civil Engineering, 5(1), 17-23.

Rifai, A. I., & Prasetyo, E. (2019, October). IMPLEMENTATION OF DATA MINING FOR MAPPING AND PREDICTION OF LIQUEFACTION DUE TO THE PALU EARTHQUAKE. In MAJALENGKA TECHNOLOGY SEMINAR (STIMA) (Vol. 4, pp. 262-269).

Rifai, A. I., Hadiwardoyo, S. P., Correia, A. G., & Pereira, P. A. (2016). Genetic Algorithm Applied for Optimization of Pavement Maintenance under Overload Traffic: Case Study Indonesia National Highway. Applied Mechanics and Materials (Vol. 845), 36.

Rifai, A. I., Hadiwardoyo, S. P., Correia, A. G., Pereira, P. A., & Cortez, P. (2015). The data mining applied for the prediction of highway roughness due to overloaded trucks. International Journal of Technology, 6(5), 751-761.

Rifai, A. I., Latief, Y., & Rianti, L. S. (2018). Data mining applied for earthworks optimisation of a toll road construction project. In MATEC Web of Conferences (Vol. 195, p. 04019). EDP Sciences.

Rifai, A.I., Prasetyo, E., Rhismono (2023). Analysis of Community Satisfaction Level on the Road Rehabilitation and Reconstruction Project (Learn from Palu Disasters Area). In: Kristiawan, S.A., Gan, B.S., Shahin, M., Sharma, A. (eds) Proceedings of the 5th International Conference on Rehabilitation and Maintenance in Civil Engineering. ICRMCE 2021. Lecture Notes in Civil Engineering, vol 225. Springer, Singapore.

Rizki, R., Rifai, A. I., & Djamal, E. Z. (2022). Geometric Redesign of Jalan Cisauk–Jaha, Banten with Manual Method (Sta. 0+ 000-Sta. 0+ 350). Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 859-864.

Rizqi, M., Rifai, A. I., & Bhakti, S. K. (2022). Design of Road Geometric with AutoCAD Civil 3D®: A Case Jalan Kertawangunan–Kadugede, Kuningan-Indonesia. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 879-887.

Rolison, J. J. (2020). Identifying the causes of road traffic collisions: Using police officers. Accident Analysis & Prevention, 1.

Schoon, & John. (2019). Pedestrian Facilities (Geometric design for safety and mobility). General road layout practice, 77.

Shevriyanto, B., Rifai, A. I., & Chiang, Z. (2021). Street Furniture in Batam: Inspirations from Natural and Cultural Inheritance. ????, (144), 47-51.

Simi ?c, J. M., Stevi ?c, Ž., Zavadskas, E. K., Bogdanovi ?c, V., Suboti ?c, M., & Mardani, A. (2020). Model for Safety Evaluation of Road Sections Based on Geometric Parameters of Road. Symmetry, 2.

Stephen, S., Rifai, A. I., & Nasrun, N. (2022). Implementation Autocad® Civil 3D for Horizontal Alignment Design of Indramayu-Jatibarang Highways. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 739-747.

Sukalkar, V. G., & Pawar, K. (2022). A Study and Design of Two Lane with Paved Shoulder in Green Filed Corridor, By Using Civil 3D. International Journal of Scientific Research in Science, Engineering and Technology IJSRSET, 202-211.

Sushma, M. B., & Maji, A. (2020). A modified motion planning algorithm for horizontal highway alignment development. Computer?Aided Civil and Infrastructure Engineering, 35(8), 818-831.

WHO. (2020). Road safety. 1.

Zhao, L., Liu, Z., & Mbachu, J. (2019). Highway alignment optimization: an integrated BIM and GIS approach. ISPRS International Journal of Geo-Information, 8(4), 172.

Zulfa, N., Rifai, A. I., & Taufik, M. (2022). Road Geometric Design used AutoCAD Civil 3D®: A Case Study Jalan Campaka-Wanaraja Garut, Indonesia. Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 843-850.

Downloads

Published

2023-01-17

Issue

Vol. 1 No. 1 (2022): Special Issue: Indonesian Journal of Multidisciplinary Science

Section

Articles

License

Copyright (c) 2022 Syafiq Human Maulana, Andri Irfan Rifai, Muhammad Isradi

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA). that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.