Changes in SNI-1726 and SNI-2847’S Effects on Low-Rise Reinforced Concrete Buildings’s Reinforcing Steel Weight

Authors

  • Suradjin Sutjipto Department of Civil Engineering, Universitas Trisakti, West Jakarta, DKI Jakarta
  • Indrawati Sumeru Department of Civil Engineering, Universitas Trisakti, West Jakarta, DKI Jakarta
  • Shericca Augustin Sucipto Department of Civil Engineering, Universitas Trisakti, West Jakarta, DKI Jakarta

DOI:

https://doi.org/10.55324/ijoms.v2i10.571

Keywords:

SNI 1726, SNI 2847, reinforcing steel weight, low-rise, reinforced concrete buildings

Abstract

The updates of the Indonesian seismic design code (SNI 1726) and the reinforced concrete design code (SNI 2847) have been applied in practice simultaneously. Based on these new codes, seismic loads generally increase, especially for low-rise buildings, and the reinforcement design requirements become much more stringent. Therefore, the construction industry predicts that there will be a significant increase in the need for reinforcing steel. This paper would like to describe the comparison of the design reinforcing steel weight in a 4-story reinforced concrete case study building with a special moment resisting frame system, which is designed using a combination of SNI 1726:2012 and SNI 2847:2013, and which is designed using a combination of SNI 1726:2019 and SNI 2847:2019. This study was found that the increase in reinforcing steel is not proportional to the increase in seismic load and much smaller. This result can then be an illustration of how much increase in design reinforcing steel when using the new codes.

References

American Concrete Institute. (2011). Building code requirements for structural concrete. ACI 318M-11.

American Concrete Institute. (2014). Building code requirements for structural concrete. ACI 318M-14.

American Society of Civil Engineers. (2010). Minimum design loads for buildings and other structures. ASCE/SEI 7-10.

American Society of Civil Engineers. (2017). Minimum design loads and associated criteria for buildings and other structures. ASCE/SEI 7-16.

Aplikasi Desain Spektra Indonesia 2010. (2010). Desain Spektra Indonesia. Ciptakarya PU.

Aplikasi Respon Spektra 2021. (2021). Desain Spektra Indonesia. Ciptakarya PU.

Badan Standardisasi. (2012). Tata cara perencanaan ketahanan gempa untuk struktur bangunan gedung dan non gedung. SNI 1726:2012.

Badan Standardisasi Nasional. (2013a). Beban minimum untuk perancangan bangunan gedung dan struktur lain. SNI 1727:2013.

Badan Standardisasi Nasional. (2013b). Persyaratan beton struktural untuk bangunan gedung. SNI 2847:2013.

Badan Standardisasi Nasional. (2019a). Persyaratan beton struktural untuk bangunan gedung dan penjelasan. SNI 2847:2019.

Badan Standardisasi Nasional. (2019b). Tata cara perencanaan ketahanan gempa untuk struktur bangunan gedung dan non gedung. SNI 1726:2019.

Badan Standardisasi Nasional. (2020). Beban desain minimum dan kriteria terkait untuk bangunan gedung dan struktur lain. 1727:2020.

Fanella, D. A. (2007). Seismic detailing of concrete buildings (2nd ed.). Portland Cement Association.

Fanella, D. A. (2016). Reinforced concrete structures - Analysis and design (2nd ed.). International Code Council.

Fanella, D. A. (2018). Structural load determination - 2018 IBC and ASCE/SEI 7-16. International Code Council.

Pusat Studi Gempa Nasional. (2017). Peta sumber dan bahaya gempa Indonesia tahun 2017. Pusat Litbang Perumahan dan Pemukiman - BPP - PUPR.

Sutjipto, S., & Sumeru, I. (2019). Comparison of the RSNI 1726:2018 and the SNI 1726:2012 design response spectra of 17 major cities in Indonesia. IOP Conference Series: Materials Science and Engineering, 650(1). https://doi.org/10.1088/1757-899X/650/1/012032

Sutjipto, S., & Sumeru, I. (2021). Anomaly phenomena on the new indonesian seismic code sni 1726:2019 design response spectra. Lecture Notes in Civil Engineering, 132. https://doi.org/10.1007/978-981-33-6311-3_43

Sutjipto, S., & Sumeru, I. (2022). Seismic design load comparison of reinforced concrete special moment frame and dual systems based on SNI 1726:2019. Lecture Notes in Civil Engineering, 216. https://doi.org/10.1007/978-981-16-7949-0_20

Downloads

Published

2023-07-28

Issue

Vol. 2 No. 10 (2023): Indonesian Journal of Multidisciplinary Science

Section

Articles

License

Copyright (c) 2023 Suradjin Sutjipto, Indrawati Sumeru, Shericca Augustin Sucipto

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA). that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.