Making Tool Equipment for Quality Standard of Hydraulic Cylinder Remanufacturing in PT UTR

Authors

  • Vuko Arief Tua Manurung Department of Mechanical Automotive, Politeknik Astra, North Jakarta, DKI Jakarta
  • Reza Candra Febriyanto Department of Mechanical Automotive, Politeknik Astra, North Jakarta, DKI Jakarta
  • Yohanes Trijoko Wibowo Department of Production Equipment and Tools Manufacturing, Politeknik Astra, North Jakarta, DKI Jakarta

DOI:

https://doi.org/10.55324/ijoms.v2i12.650

Keywords:

remanufacturing, hydraulic cylinder, 7 up tools

Abstract

This paper deals with process of remanufacturing which is a process that is applied to products have expired or have been damaged, so the products can be reused with almost the same quality and balance as new products. PT UTR plant Jakarta has a new project, namely remanufacturing PT MCG's hydraulic cylinder. To maintain customer trust, each component that is remanufacturing must be ensured of its quality by means of testing before being sent to the customer. This equipment is made based on the use of management methods that have been standardized, namely 7++ ups tools. In collecting the required data, a direct approach was taken by following the existing remanufacturing process flow, so that the tool to be made was really useful and easy to use. From the results of the research carried out, we make a special equipment of a stand test bench hydraulic cylinders so that each component of the hydraulic cylinder that was remanufacturing could be done on a test bench. With this equipment, the quality standards of remanufacturing hydraulic cylinders can be accounted for.

References

Duffy, O. C., Wright, G., & Heard, S. A. (2017). Fundamentals of mobile heavy equipment. Jones & Bartlett Learning.

Fofou, R. F., Jiang, Z., & Wang, Y. (2021). A review on the lifecycle strategies enhancing remanufacturing. Applied Sciences (Switzerland), 11(13). https://doi.org/10.3390/app11135937

Hamad, M. (2016). AutoCAD 2017 3D Modeling. Mercury Learning and Information.

Ji, L. (2021). Application of intelligent manufacturing in the production line of hydraulic support coal machinery plant. IOP Conference Series: Earth and Environmental Science, 692(4). https://doi.org/10.1088/1755-1315/692/4/042061

Kumar, S. P. P., & Lee, S. S. (2021). Design and experimental analyses of hybrid piston rods used in hydraulic cylinders under axial load. Applied Sciences (Switzerland), 11(18). https://doi.org/10.3390/app11188552

Liu, C., Zhu, Q., Wei, F., Rao, W., Liu, J. J., Hu, J., & Cai, W. (2019). A review on remanufacturing assembly management and technology. International Journal of Advanced Manufacturing Technology, 105(11). https://doi.org/10.1007/s00170-019-04617-x

Manurung, V. A. T., Joko, Y. T. W., & Poetra, R. I. (2018). Auto Drain Valve Water Separator inside the Unit of Komatsu HD 465-7R. IOP Conference Series: Materials Science and Engineering, 306(1). https://doi.org/10.1088/1757-899X/306/1/012128

Megel, M., Westmoreland, B., Jones, G., Phillips, F., Eberle, D., Tussing, M., & Yeomans, N. (2011). Development of a structurally optimized heavy duty diesel cylinder head design capable of 250 bar peak cylinder pressure operation. SAE International Journal of Engines, 4(3). https://doi.org/10.4271/2011-01-2232

Nwankpa, C., Eze, S., Ijomah, W., Gachagan, A., & Marshall, S. (2021). Achieving remanufacturing inspection using deep learning. Journal of Remanufacturing, 11(2). https://doi.org/10.1007/s13243-020-00093-9

Onstott, S. (2017). AutoCAD 2018 and AutoCAD LT 2018 Essentials. John Wiley & Sons, Inc.

Panjaitan, D. P. (2017). Basic Hydraulic Cylinder. PT Universal Tekno Reksajaya.

PT Universal Tekno Reksajaya. (2013). PT Universal Tekno Reksajaya. PT Universal Tekno Reksajaya.

Sevagin, S. V., & Mnatsakanyan, V. U. (2020). Ensuring the required manufacturing quality of hydraulic-cylinder rods in mining machines. IOP Conference Series: Materials Science and Engineering, 709(4). https://doi.org/10.1088/1757-899X/709/4/044095

Singh, H., & Jain, P. K. (2019). Economic analysis of remanufacturing of engine valves - a case study. Journal of Remanufacturing, 9(1). https://doi.org/10.1007/s13243-018-0055-9

Soeseno, E., & Kusumastuti, R. D. (2019). Analysis of Factors Causing Delays in the Diesel Engine Remanufacturing Process at an Indonesian Company. Logistics, 3(1). https://doi.org/10.3390/logistics3010001

Szepesházi, R., Koch, E., & Wolf, Á. (2015). Hydraulical and mechanical modelling of levees. 12th Slovak Geotechnical Conference at Bratislava, Slovak Republic.

Technical Training Department. (2012). Basic Maintenance. PT United Tractors.

Tká?, Z., Kosiba, J., Hujo, Jablonický, J., & Nosian, J. (2018). Experimental hydraulic device for the testing of hydraulic pumps and liquids. Tribology in Industry, 40(1). https://doi.org/10.24874/ti.2018.40.01.14

Xu, D., & Zhang, J. (2016). Remanufacturing and Benefits Analysis of Construction Machinery Hydraulic Valves. https://doi.org/10.2991/icmmita-16.2016.246

Yan, C. (2013). Remanufacturing and benefits analysis of construction machinery hydraulic valves. Applied Mechanics and Materials, 401–403. https://doi.org/10.4028/www.scientific.net/AMM.401-403.2266

Zhang, H., Feng, S., & Li, Y. (2021). The Simulation Analysis on Pressure Characteristics of Internal Leakage in Hydraulic System of Heavy Vehicles. IOP Conference Series: Earth and Environmental Science, 719(4). https://doi.org/10.1088/1755-1315/719/4/042028

Downloads

Published

2023-09-25

Issue

Vol. 2 No. 12 (2023): Indonesian Journal of Multidisciplinary Science

Section

Articles

License

Copyright (c) 2023 Vuko Arief Tua Manurung, Reza Candra Febriyanto, Yohanes Trijoko Wibowo

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA). that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.